Wolf Link home User Manual

Overview
3 Overview
3.1 Unitdescription
The Link home and Link pro interface modules can be used to access WOLF
control components remotely in order to view states and levels and change
parameters. Over a secure internet connection. The WOLF Link home is
designed to be installed in an appliance. The WOLF Link pro is designed for
wall mounting.
Both interface modules can be integrated into an existing network either with
a network cable (LAN) or wirelessly (WLAN).
They can be operated using the WOLF Smartset app (for iOS and Android),
the WOLF portal on any platform (internet access required) or the Windows
PC application WOLF Smartset.
Concurrentaccess
A system can only be accessed by one user at any time.
3.2 Compatibleappliances
WOLF
Link
home
WOLF
Linkpro
CGB-2, CGW-2, CGS-2 gas condensing boiler
TOB wall mounted oil condensing boiler
Gas condensing boilers MGK-2
BWL-1S split air source heat pump
COB oil condensing boiler
MGK gas condensing boiler
CGB, CGW, CGS, FGB gas condensing boilers
CGG-2, CGU-2 conventional gas boilers
R2, R3, R21 boiler control units
BWW-1, BWL-1, BWS-1 mono block heat pumps
MM, MM-2 mixer module
KM, KM-2 cascade module
in conjunction with a WOLF Link home compatible heating appliance,
Full functional scope only with appliances running current software
versions.
Note:
ISM8
WWW
ISM7i /
LINK HOME
ISM7e /
LINK PRO
DSL-ROUTER
WOLF
PORTALSERVER
OPEN SOURCE COMMUNITY PROJECT
WWW.IOBROKER.NET
LAN/WLAN
128 BIT SECURITY
ENCRYPTION
SYSTEM
INTERFACE
APP
HOSTED IN
GERMANY
LONWORKS
KM-2 cascade
module
WOLF WRS-2 CONTROL SYSTEM
SM2-2 solar pump
assembly
BM-2
programming
unit
Heat generator
Mechanical
ventilation unit
Ventilation unit Combined heat and power module
Smartset app/portal
Pump groups incl.
MM-2 mixer module +
BM-2 Solar
5
3066086_201803

Wolf Link home Specifications

General

Brand	Wolf
Model	Link home
Category	Control Unit
Language	English