REPLACEMENT PARTS
Manual Blade Setting Assembly (EG250)
10
10-29 EGdoc022715 REPLACEMENT PARTS
55 PLATE, EDGER HANDLE 047689 1
56 SPRING, 1/2 OD X 1-1/2 LENGTH X .055 047690 1
57 WASHER, 13 FLAT ZINC F81056-1 1
58 NUT, M12-04-A THIN F81034-6 2
59 RING, Z7 OUTSIDE RETAINING F81090-17 1
60 RING, W13 INSIDE RETAINING F81090-18 1
61 SCREW, M4X8 GEOMET HEX SOCKET SET W/CONE POINT F81011-40 1
62 WASHER, 7.2/12.5 097264 2
63 TUBE, CRANK HANDLE KNOB 097263 1
64 BOLT, Z M10X25-8.8 CARRIAGE HEAD ZINC F81003-59 2
65 NUT, M10-8-B HEX NYLON ZINC LOCK F81033-1 2
66 WASHER, 10.5 FLAT ZINC F81055-1 2
67 KEY, A6X6X30 PARALLEL 094245 1
68 WASHER, 13 FLAT ZINC F81056-1 2
69 NUT, M12-8 HEX NYLON ZINC LOCK F81034-2 2
70 SCREW, M12X35-8.8 DIN7991 FLAT SOCKET HEAD CAP ZINC F81004-69 2
71 PLATE, DIAL SCALE 513852-1 1
72 WASHER, 6.4 FLAT ZINC F81053-1 8
73 BOLT, M6X16-8.8 HEX HEAD FULL THREAD ZINC F81001-15 4
74 NUT, M6 8 HEX ZINC F81031-1 4
75 BOLT, 12/M10X25 12.9 ISO7379 (BOSSARD) SHOULDER F81003-84 1
76 NUT, M10X13X22 RIVET ZINC-PLATED F81033-15 1
77 DECAL, DIAL SCALE 513851 1
78 LINK, 10B-1PZ MASTER 088671 2
79 GUARD, DRIVE SPROCKET 513606-1 1
80 BOLT, M8X20-8.8 CARRIAGE HEAD ZINC F81002-11 2
81 WASHER, 8.4 FLAT ZINC F81054-1 2
82 NUT, M8 8 HEX NYLON ZINC LOCK F81032-2 2
REF. DESCRIPTION ( Indicates Parts Available In Assemblies Only ) PART # QTY.
To Next Page
Loading...
