SPECIFICATIONS
Multirip Edger Specifications
Specifications EGdoc022715 7-3
7
7.2 Multirip Edger Specifications
See Table 7-2 The power option specifications of the Wood-Mizer Edger is listed below.
See Table 7-3 The noise level of the Edger is given below.
1
23
Motor Specifications
(CE and U.S.)
Motor Specifications
(CE and U.S.)
Motor Specifications
Motor Type E20 Electric Motor E25 Electric Motor E25 Electric Motor
Manufacturer Siemens, Germany Siemens, Germany Siemens, Germany
Voltage 400V, 460V 400V, 460V 230V
Maximum Current 26.5 A 33,5 56,5
RPM 2940 RPM@50Hz
3520 RPM@60Hz
2940 RPM@50Hz
3520 RPM@60Hz
2940 RPM@50Hz
Rated Power 15kW ( 20HP )@50Hz
17,3kW ( 23,5HP )@60Hz
18.5kW ( 25HP )@50Hz
21,3kW ( 29HP )@60Hz
18.5kW ( 25HP )@50Hz
Manufacturer Part # 1LA7164-2AA60 1LA7166-2AA60 1LA7166-2AA10-Z
TABLE 7-2
Engaged
Edger
Equipped With E20 Electric Motor
84 dB (A)
TABLE 7-3
1. The noise level measurement was taken in accordance with PN-EN ISO 3746 Standard. Value for associated
uncertainty K=4dB.
2. The measured values refer to emission levels, not necessarily to noise levels in the workplace. Although there is
a relation between emission levels and exposure levels, it is not possible to determine with certainty if preventives
are needed or are not needed. The factors affecting a current level of noise exposure during work are inter alia
room characteristics and characteristics of other noise sources, e.g. number of machines and machining
operations nearby. Also, the permissible exposure level value may vary depending on country. This information
enables the machine’s user to better identify hazards and a risk.
3. IMPORTANT! The total value of hand-arm vibration the operator may be exposed to does not exceed 2.5 m/s2.
The highest root mean square value of weighted acceleration to which the whole operator’s body is subjected does
not exceed 0.5 m/s2.
To Next Page
Loading...
