INTRODUCTION
Machine Description
1
1-5 doc101521 INTRODUCTION
The chip extractor must be approved according to the CE standard.
The chip extractor hose diameters for the Moulder = 100 mm (4”).
The pressure drop in the Moulder is 20 mm column of water at 25 m/s.
The dust extractor airflow (“without external connection”) should be 1000 m
3
/h.
IMPORTANT! The dust extractor hoses must be grounded or made of
materials that do not accumulate an electrostatic charge.
CAUTION! Always turn on the chip extractor before starting the
machine.
To Next Page