WOOSIM WSP-W40 - Technical Specifications

WSP-W40 Rev. 3.2
http://www.woosim.com
9
1
1
.
.
4
4
.
.
S
S
p
p
e
e
c
c
i
i
f
f
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
.
.
Item Specification
Printing method Direct thermal line printing
Character size
- Font Size A: 12X24 / Font Size B : 9X24 / Font Size C : 8X16
- KOR : 24X24(16X24) / CHN, JPN : 24X24
Characters per line
- Font A : 69cpl / Font B : 92cpl / Font C : 104cpl
- KOR, CHN, JPN : 34cpl
Optional Characters
Alphanumeric:95, Extended Graphics:128X50 pages, International:10,
Simplified/Traditional Chinese, Japanese, Korean
Resolution 203dpi, 8dots/mm
Print width 4-inch (104mm, 832dots)
Printing speed 50mm / sec (MAX)
Dimensions 138.4 x 88.5 x 45.2 mm
Weight (w/o paper) 281g
Interface USB, Bluetooth Ver3.0
Paper supplied Thermal roll paper (113mm wide, 38ø)
Barcode supplied
1-dimension : UPC-A, UPC-E, EAN-8, EAN-13, CODE-39, CODE-93,
CODE-128, ITF, CODABAR
2-dimension : PDF417, Micro PDF417, Truncated PDF417, QR-CODE,
DATA Matrix, Maxicode
Etc :GS1 databar
Driver
Microsoft Windows, Linux
H/W spec. MCU : RX-32bit, RAM : 128M bit, FLASH : 64M bit
Receive buffer size 1M bytes
Sensor Support Paper, Label
Battery Rechargeable 7.4V DC 1880mAh (Li-ion)
Battery duration 1 hour continuous printing
Battery Charger
Input (100~240V AC 50~60Hz)
Output(8.4VDC/0.8A), 4hours full charge time
Environment
Conditions
Temperature
-10°C ~ 50°C (operating)
-20°C ~ 70°C (storage)
Humidity
30% - 80% (operating)
10% - 90% (storage)
MCBF (Mean Cycle
Between failure)
Mechanical 37,000,000 lines
Head Approximately 50Km
< Table 1 >