Worcester Greenstar CDi Compact Series User Manual

10
CONTROLS
6 720 803 801 (2012/09)
3.1.9 BOILER ALERT STATE
In the event of an alert, a fault code and an alert symbol will be displayed on the boiler display, and the blue operation/fault
light will flash. Refer to the Fault finding section on page 14 or press to clear the problem.
3.1.10BOILER RESET
1. To reset the boiler, press .
2. “Reset” and are briefly displayed.
B If the reset was successful the boiler will return to normal operation.
B If the reset was not successful then the alert code will be displayed again, and the blue operation/fault light will continue to flash.
3.1.11TURN OFF THE OPERATION/FAULT DIAGNOSTIC LIGHT (BLUE)
Your new Greenstar CDi Compact boiler is designed to use as little electricity as possible during operation and in stand-by mode. To
further enhance your energy saving during stand-by, you may choose to deactivate the operation/fault diagnostic light. The light will
still flash to alert you to a possible fault, but will not activate during a demand for heat. Please ask your installer to activate this
feature.
If the fault remains and cannot be cleared by pressing the reset button, contact Worcester, Bosch Group for
assistance on 0844 892 3000.
reset
max
min
2
3
1
04
bar
1
ok
eco
reset
e
max
min
°C
°F
227
°C
°F
227
6720643358-14.1Wo
reset
max
min
2
3
1
04
bar
1
ok
eco
reset
e
max
min
°C
°F
Reset
6720643358-09.2Wo
°C
°F
Reset
1.
2.

Worcester Greenstar CDi Compact Series Specifications

General

Model	Greenstar CDi Compact Series
Category	Boiler
Type	Combination
Efficiency Rating	A
Fuel Type	Natural Gas
Mounting	Wall-mounted
Efficiency	Up to 94%
Weight	34kg
Dimensions (HxWxD)	700mm x 420mm x 330mm