ENGLISH
9
Setting MIDI OUT
0
2
4
6
8
10
0
2
4
6
8
10
RECORD
FLAHS 2
0
2
4
6
8
10
0
2
4
6
8
10
FLAHS 1 - 16
Exit MIDI Setting
RECIBIR ARCHIVOS MIDI
RECORD
REC
EXIT
Sending MIDI File Dump
0
2
4
6
8
10
0
2
4
6
8
10
RECORD
FLAHS 3
0
2
4
6
8
10
0
2
4
6
8
10
RECORD
FLAHS 4
Implementation
Tap this button
three times
Tap the Flash button 2 three times while
holding down the Record button, the
Segment Display reads "CHO" indicating
MIDI OUT channel setup is available.
1 .
Tap the Flash button numbered from 1-16
to assing MIDI OUT channel 1-16, the
relevant channel LED lights indicating MIDI
OUT channel is set.
2 .
Press and down the Record
button. While holding down
the Record button tap the
Rec Exit button to exit MIDI
setting.
Tap this button
three times
Tap the Flash button 3 three
times while holding down
the Record button, the
Segment Display reads "IN"
indicating the controller is
ready to receive MIDI file
dump.
Tap this button
three times
Tap the Flash button 4 three times
while holding down the Record
button, the Segment Display reads
"OUT" indicating the controller is
ready to send a file.
During file dump, all other operations will not function,
Functions will automatically return when the file dump is
completed.
File dump will be interrpted and stop if occur or power
failure.
NOTE:
During receiving and sending MIDI data, all MIDI scenes and channels being run will automatically paused
if there is no response within 10 minutes.
During receiving and sending file dump, the controller will automatically search for or send Device ID
of 55H(85), a file named DC2448 with an extension of "BIN(SPACE)".
File dump allows this controller to send its MIDI data next unit or other.
To Next Page
Loading...
Need help?
General
