Recon Drone Live Feed App Instructions
Notes:
1. App requires android 4.2 or later and IOS 7.1 or later.
2. The app cannot film or shoot if there is no memory card inside the camera.
3. The video transmission range is around 650 feet depending on environment. The video may delay and
the app may lose connection if the drone gets too far from your smartphone.
1. Search “Recon Drone” on the Apple Store or Google Play and download it to your
smartphone.
2. Turn on the Recon drone. Open the app on your phone and tap “WiFi
Settings.” Connect your smartphone to the cameras WiFi signal and enter
the password “1234567890” to connect.
3. Go back to the app and tap “Connect” to enter the live video interface.
4. Tap “Photo” or “Record” to switch to the shooting mode you want. Tap the shutter
button to take photo or video.
5. Tap to go to Media Library and tap “save” to download the file to your mobile
device.
6. Tap to exit the live video interface. Tap “Local” icon to check the local media
you have downloaded from the camera.
Resolution and frames per second for video and photos
Media Library
Shutter Button
Shooting Modes
Camera Settings
Time delay for taking photo or video
Time interval for each shot taken in Burst Mode
Number of images taken in Burst Mode
Camera Live Feed
Camera Battery
Local Media
WiFi Settings
Connect Live Feed
Setup & Assembly Cont.
To Next Page
Loading...
Need help?
General
