Follow Me
Gimbal Control
Pressing and holding will make the gimbal yaw left. Pressing and holding
will make the gimbal yaw right.
Turning the dial up will pitch the gimbal up. Turning the dial down pitch the gimbal
down.
Notes:
Keep an eye on the following path and ensure there are no obstacles in the way. Do not move too fast
when the drone is following you to reduce the chance of a lost connection with the Smart Watch.
After the Smart Watch gets a GPS signal strength of at least 8 and shows an “ ”,
press once to activate Follow Me mode. The drone will autonomously follow
the Smart Watch when they are 15 feet away from one another at a speed of up to
44mph. The drone will face the Smart Watch during this mode, adjust the cameras
gimbal to get your perfect shot.
When the Smart Watch stops moving, the drone will hover approximately 15 feet
from the Smart Watch. Pressing will stop the Follow Me mode.
Follow Me (press once)
Gimbal Pitch
To Next Page
Loading...
Need help?
General
