When the drone is in flight pressing and holding will activate Orbit Mode. This
mode autonomously moves the drone to maintain a 15ft. radius orbiting the point
where you activated the mode. The drones front will point to the center of orbit at all
times. Adjust the camera gimbal to get your target in frame.
During Orbit Mode, pulling the right stick to the left can make the orbit radius larger,
pulling the right stick to the right can make the orbit radius smaller. Pressing
once will stop Orbit Mode.
The left dial is used to control the pitch of the gimbal within 90 degree.
The right dial is used to control the yaw of the gimbal within 180 degree.
Orbit Mode
Gimbal Controls
ON
OFF
90º
ON
OFF
180º
15 Feet
Pitch
Yaw
Transmitter Operations Cont.
To Next Page
Loading...
Need help?
General
