Drone Battery Balance Charger
Smart Watch Transmitter
Camera
AC Power Cord
Battery Charging Times:
Drone Battery - 2 hours Transmitter - 6 hours Smart Watch - 1 hour Camera - 2 hours
Battery Running Times:
Drone Battery - 25 min. Transmitter - 24 hours Smart Watch - 1 hour Camera - 70-90 min.
Charging Cable
Micro USB Cable
Notes: Insert the charging cable into the correct position on battery. Otherwise, the battery will not charge
and all 4 LEDs will flash continuously. When the transmitter and smart watch are charging, the screen will
display a indicating the charging progress. The camera will start charging when a red light is on and
is fully charged when the red light turns off.
Mini USB Cable
Setup & Assembly
Charging Everything
Turn on the battery, transmitter and smart watch to check the battery levels.
Insert the AC power cord into the balance charger and plug into a standard U.S. wall
outlet. Connect the battery with the balance charger using the supplied charging
cable. When the battery is charging, the LEDs will light and indicate the battery level.
The LEDs on the charger will flash one by one and indicate charging progress.
When all 4 LEDs are on, the battery has been fully charged.
The transmitter and smart watch use the same type of USB cable to charge. The
camera uses the large Mini USB cable to charge when not connected to drone.
To Next Page
Loading...
Need help?
General
