Notes:
Do not press two buttons at the same time as they may interfere with each other.
Press the hover button first before switching from one flight mode to another.
1 2
Binding..
Process=xx%
Connecting...
ID=XXXX
...............
Code Binding Drone to Smart Watch
The drone has already been binded with the smart watch included by default. The
following code binding is not necessary unless the drone is going to be controlled
with a new smart watch or your current smart watch is having trouble connecting.
1. Turn on the drone and press the button underneath the gimbal to start binding.
3. Turn on the watch and hold the and at the same time until the
smart watch displays “Binding ID=XXXX”.
4. The watch will connect with the drone when the smart watch screen enters the
control interface.
Initialized
9
00.0m 00.0m
00:00:00
16
Stabilize
9
00.0m 00.0m
00:00:00
16
Flight Height
Power on/off (press & hold)
Auto Take Off (press once)
Auto Land (press once)
Return Home (press & hold)
Descend (press once)
Gimbal Yaw Right (press & hold)
Gimbal Pitch Up/Down
(Rotate Up/Down)
Panoramic Mode (press once)
Orbit Mode (press & hold)
Hover (press once)
Activate Rotors (press & hold)
Follow Me (press once)
Ascend (press once)
Gimbal Yaw Left (press & hold)
Joystick
Recon GPS Strength
Watch GPS Strength
Recon Battery Level
Ready to fly
Watch Battery Level
Follow Me Mode
Rotors Locked
Time
Distance
Smart Watch Operations
Smart Watch Overview & Binding to the Recon Drone
To Next Page
Loading...
Need help?
General
