Worlde MINI - Assign an Encoder to Control a MIDI CC # between Two Values

HANGZHOU WORLDE DIGITAL PIANO CO.,LTD HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
WEBSITE: WWW.WORLDE.COM.CN EMAIL:SALES@WORLDE.COM.CN TEL:86 571 88730848
- 12 -
Next we’ll set some minimum and maximum values that might work (adjust them to suit the audio source):
The first press of Pad 6 will send a CC# 74 command with a value of 78, which will close the filter down part way but still
let a lot of the audio pass through. The second press of Pad 6 will send a value of 127, opening the filter completely.
Note: Be sure to check the MIDI Channel assignment to make sure it matches that of the receiving device.
5.1.5 Assign an Encoder to control a MIDI CC # between two values
The encoders are assignable using the same techniques described for the pads. Let’s give a quick example of an
interesting use: setting the rate of an LFO so it operates only within a certain range.
Looking at the picture above we see familiar information: