HANGZHOU WORLDE DIGITAL PIANO CO.,LTD HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
WEBSITE: WWW.WORLDE.COM.CN EMAIL:SALES@WORLDE.COM.CN TEL:86 571 88730848
- 5 -
1. Trigger pads
pads can transmit note messages or control change messages.
2. Keyboard
There are twenty-five velocity-sensitive keys that can transmit note messages. When CC mode is on, they
transmit control change messages.
3. Encoder
These encoders transmit control change messages.
4. Pitch/Mod Touch strips
Pitch bend and modulation are activated by pressing the touch strips.
5. Shift button
Hold Shift and press a Pad to select a Snapshot
Hold Shift and press a key to select the MIDI Channel
6. Octave Down/Up buttons
Shift the keyboard range +/- 4 octaves. Press both buttons at once to reset the range to center.
7. Pad 1-8/9-16 button
Use to access Pad banks 1-8 or 9-16
8. USB connector
Connect the MINI to your computer with a USB cable via this port.
3.1.2 Keyboard
WORLDE MINI has a 25-key velocity-sensitive mini-keyboard with a control surface designed for perfect integration
with software interface.
3.1.3 Pitch and Modulation touch strips
If you touch the Pitch bend strip at its center and move your finger forward or backward it will alter the pitch of the played
sound. The range of the pitch bend is determined by the preset that has been selected.
Similarly, moving your finger along the Modulation strip alters the modulation amount of the played sound. The level of
modulation introduced by activating the modulation strip depends on which preset is selected.
Note:The modulation strip may not be assigned to modulate a parameter in some presets.
To Next Page
Loading...
Need help?
General
