HANGZHOU BLUE WHALE MUSIC TECHNOLOGY CO.,LTD HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
WEBSITE: WWW.WORLDE.COM.CN EMAIL:SALES@WORLDE.COM.CN TEL:86 571 88730848
- 10 -
5.6.5 Transpose
Press the MENU button repeatedly until the OLED dispays “Transpose” to start the function of Transpose. This function allows the
keyboard to change the Pitch up/down by semi-tone. When this function is valid, the OLED displays the “Transpose” and the value of
current transpose. It can be adjusted by +/- button. The initial value is 0, adjusting scale is -12～12. The operation steps is shown as below
and the OLED displays the following:
(1) Press the MENU button repeatedly until the OLED dispays “Transpose”.
(2) Press “+” or “-” button to adjust the keyboard transpose, the OLED will display the current transpose. Holding the “Enter” button for 2
seconds to exit the edit mode.
5.6.6 Program change
Press the MENU button repeatedly until the OLED dispays “Program change” to start the function of Program change. Program change is
for adjusting the voice of current channel. When this function is valid, the OLED displays the “Program change” and the current voice
number. It can be adjusted by +/- button and confirmed by Enter button. The initial value is 1, adjusting scale is 1～128. The operation
steps is shown as below and the OLED displays the following:
(1) Press the MENU button repeatedly until the OLED dispays “Program change”.
(2) Press “+” or “-” button to adjust the keyboard program, the OLED will display the current keyboard program.
(3) Press the “Enter” button to confirm and the OLED will display “Done”. Holding the “Enter” button for 2 seconds to exit the edit mode.
5.6.7 MIDI channel
Press the MENU button repeatedly until the OLED dispays “MIDI channel” to start the function of Channel selection. Channel selection is
for adjusting the Current MIDI channel. When this function is valid, the OLED displays the “MIDI channel” and the current channel number.
It can be adjusted by +/- button and confirmed by Enter button. The initial value is 1, adjusting scale is 1～16. The operation steps is
shown as below and the OLED displays the following:
(1) Press the MENU button repeatedly until the OLED dispays “MIDI channel”.
(2) Press “+” or “-” button to adjust the keyboard program, the OLED will display the current MIDI channel.
(3) Press the “Enter” button to confirm and the OLED will display “Done”. Holding the “Enter” button for 2 seconds to exit the edit mode.
5.6.8 Select the Backlit RGB Color of 16 Pads
Press the MENU button repeatedly until the OLED dispays “Pad color R/G/B” to start the function of selecting the Backlit RGB Color of 16
Pads. When this function is valid, the OLED displays the “Pad color R/G/B” and the current RGB color number. R is for red, G is for green
and B is for blue. It can be adjusted by +/- button and confirmed by Enter button. The initial value is 127, adjusting scale is 0～255. For
example, you may want to set the Pad1 with RED color for the RGB backlight. This is done by setting the Pad color R to 127, Pad color G
to 0 and Pad color B to 0 to the Pad1. The operation steps is shown as below and the OLED displays the following:
(1) Trigger the Pad1.
(2) Press the MENU button repeatedly until the OLED dispays “Pad color R”.
(3) Press “+” or “-” button until the OLED displays 127.
(4) Press the “Enter” button to confirm and the OLED will display “Done”.
To Next Page
Loading...
