Lawn Mowing Robot EN
10
To resume:
Scene 1: STOP –Auto Shutdown after 20 mins
• Press the STOP Button
• Open the Keypad Window
• Press the ON/OFF Key (21) to ON
• Press
key to correct the problem
• Press
key again and Close the Keypad Window
• Now the Landroid
®
L will begin to mow!
Scene 2: STOP– Without Auto Shutdown
• Press the STOP Button
• Open the Keypad Window
• Press
key to correct the problem
• Press
key again and Close the Keypad Window
• Now the Landroid
®
L will begin to mow!
3.3 How big an area can my Landroid
®
L mow?
Your Landroid
®
L is capable of mowing areas of up to different size areas, although this depends on various factors, such as:
• Species of grass in your lawn and its growth rate
• Sharpness of the Blades (17)
• Humidity
• Surrounding temperature
• Amount of obstacles in your Lawn
If the surrounding temperature is very hot where you live then your Landroid
®
L may charge at a slightly slower rate. The
Landroid
®
L uses less energy in open areas that have fewer obstacles, such as flower beds, fountains, walkways, etc…
You can find the default work time of Landroid
®
Lfor different lawn size in programming guide
Mowing times are different for every lawn depending on the factors mentioned previously. Gradually adjust the time you allow
your Landroid
®
L to mow each day until you find the most suitable setting.
You can also program Landroid
®
Lworking time to suit your schedule – refer to Programming Guide.
3.4 How efficiently will my Landroid
®
L mow the grass?
The Landroid
®
L’s cutting height can be adjusted between 2cm - 6cm. Before starting your Landroid
®
L for the first time, you should
cut the grass to the height not more than 9 cm. Then make sure you open the GRASS CUTTING HEIGHT ADJUSTMENT COVER (6)
and set the cutting height to its maximum cutting height of 6cm (See Fig. F, G).
Your Landroid
®
L will cut its best in dry weather. It does not like wet grass, which can build up on the Blade Turning Disc (16) and
within the motor, and can also cause loose traction and slippage while working.
Your Landroid
®
L is afraid of Lightening Storms. In case of a Lightening Storm, protect the Landroid
®
L by unplugging the Charging
Base (3), disconnecting the Boundary Wire (23), and making sure the Landroid
®
L is not allowed to charge.
Your Landroid
®
L loves mowing grass and requires the Cutting Blades (17) to be kept in good condition to cut its best. The
Landroid
®
L can do most things by itself, but will need your help sometimes to prevent damage to itself.
• Never let the Landroid
®
L travel over gravel.
• Remove or prevent access to obstacles that the Landroid
®
L could accidentally climb and damage its Blade Disc on.
• Remove all debris and foreign objects from your lawn.
G
20
25
30
35
40
45
50
55
60
F
To Next Page
Loading...
Need help?
General
