Lawn Mowing Robot EN
13
7.2 Keep it Clean
WARNING! Before cleaning turn your Landroid
®
L OFF. Put
on protective gloves before cleaning the Blade Disc (16)
and do not use running water. (See Fig. L)
A. Cleaning the Body
Your Landroid
®
L will live a much happier and longer life if it is cleaned
regularly. Although, as your Landroid
®
L is an electric machine, you will need
to take care when cleaning, so DO NOT use a hose, high pressure washers
or otherwise pour running water on your Landroid
®
L, it is best to use a spray
bottle filled with water. When cleaning the machine body use a soft brush
or clean cloth and avoid using solvents or polishes (See Fig. L) .Lastly, make
sure that you remove all build up of grass clippings and debris.
B. Cleaning the Underside
Again, it is important that you power the Landroid
®
L OFF using the ON/Off
Button and wear protective gloves before touching the Blade Disc (16).
First, flip your Landroid
®
L upside down to expose its underside. Here you will see the Blade Disc, the Main Housing (14), and the
Front (18) and Drive (11) Wheels. Clean everything thoroughly with a soft brush or moist cloth.
Rotate the Blade Disc to ensure it rotates freely. Check the blades spin freely around the fixing screws. Remove any obstructions.
IMPORTANT: Remove any lodged debris so that it does not cause a crack in the Blade Disc. Even the
tiniest crack can decrease your Landroid
®
L's mowing output.
C. Clean the contact pins and the charging strips
Clean the Contact Pins (2) located on the Charging Base (3) and the Charging Strip (5) located on the Landroid
®
L using a cloth.
Remove any build up of grass clippings and debris around the contact pins and charge strips periodically to ensure the Landroid
®
L
successfully charges each time.
7.3 Battery Life
The heart of the Landroid
®
L is its 28-volt lithium-ion battery. No maintenance is required. For proper storage of the battery, make
sure it is fully charged in kept in a cool dry place between (20°C-60°C).
The life-span of the Landroid
®
L’s battery depends on various factors, such as:
• The time span of the mowing season in your region.
• Amount of hours the Landroid
®
L mows per day.
• Battery maintenance during storage.
Landroid
®
L can be charged manually without the boundary wire.
To manually charge the battery without connecting the boundary wire to the charging base;
1. Connect the Charging Base to a suitable power supply.
2.
Manually dock the Landroid
®
L into the Charging Base while the Landroid
®
L is powered off. (See Fig.M1)
3. The charging base red light will turn on.
4. While “charging” is shown on the screen. (See Fig. M2), Landroid
®
L will begin to charge.
L
M1
1
2
M2
To Next Page
Loading...
Need help?
General
