Lawn Mowing Robot EN
12
6. Software update
Your Landroid
®
L software can be updated when new versions become available. The software version will be displayed in the
diagnosis page by pressing button 2 on homepage. The latest software can be downloaded from our website
www.worxlandroid.com. See the detailed guideline on download page.
The manual in box is based on the default software in the mass production .Some new features/functions in the new version may
not exist in the manual If you found some settings not in the manual, please visit www.worxlandroid.com to download the latest
manual.
7. Maintenance
Your Landroid
®
L needs to be checked from time to time. The Landroid
®
L works hard and after time needs a good cleaning as well as
to have its parts replaced, as they can become worn. In the following we want to let you know how to take care of your Landroid
®
L.
7.1 Keep it Sharp
WARNING: Before cleaning, adjusting, or replacing the
Blades, turn your Landroid
®
L OFF and put on protective
gloves.
WARNING! When fitting new blades, make sure you
replace ALL the blades. Always use new screws when
fitting blades . This is important to ensure blade retention.
Failure to use new screws could cause serious injury.
The Landroid
®
L does not cut grass like other mowers. Its Blades (17)
are razor sharp on all 4 edges and spin in both directions for maximum
cutting capacity (See Fig. J).Each blade of your Landroid
®
L has 4 cutting
edges. Depending on the frequency the Landroid
®
L mows your lawn,
the cutting blades will need to be flipped/rotated periodically for a new
cutting edge. If your Landroid
®
L is programmed to mow the lawn every
day then the cutting blades will need to be rotated monthly for the
best mowing results. Each cutting blade will last up to 4 months when it is programmed to mow every day. When the cutting
blades are dull and worn out, they should be replaced with the spare blades provided with your Landroid
®
L. Spare blades are
also available at your nearest WORX retailer.
A. Rotate and Flip the Blades
Your Landroid
®
L carries the Blades that are all screwed onto the Blade Disc (16). The Blades allow the Landroid
®
L to do its job and
need care and attention. Every once in awhile, you should simultaneously rotate and flip all blades for a perfect cut. When rotating
and flipping the Blades, make sure all the Blades are adjusted at the same time or else it could make the Blade Disc off balance.
If your Landroid
®
L mows on a normal schedule (daily) then the Blades should last one season if they are rotated and flipped every
month. Always check to see if the Blades are chipped or damaged and replace them if they are.
B. Replace the Blades (See Fig. K)
After some time, usually every season, your Landroid
®
L’s Blades will need
to be replaced. Your Landroid
®
L does not like mowing while using Blades
of different age and quality. So when replacing the Blades, make sure
to replace all of them at the same time. You can replace them with one
of the three spare Blade kits and extra Blade screws supplied with your
Landroid
®
L.
Before attempting to replace your Landroid
®
L’s Blades, turn the power off
and put on protective gloves. Then follow these steps:
1. Gently flip the Landroid
®
L over
2. Remove the battery cover and remove the battery.
3. Take the screws off the Blades with a screwdriver
4. Firmly screw on the new Blades
5. Refit the battery and battery cover.
IMPORTANT: After screwing the Blade to the Blade Disc,
make sure the Blade is able to spin freely.
K
To Next Page
Loading...
