Lawn Mowing Robot EN
13
7.2 Keep it clean
WARNING: Before cleaning turn your Landroid
®
M
OFF. Put on protective gloves before cleaning the
Blade Turning Disc (13) and do not use running water.
(See Fig. L)
A. Cleaning the body
Your Landroid
®
M will live a much happier and longer life if it is
cleaned regularly. Although, as your Landroid
®
M is an electric
machine, you will need to take care when cleaning, so DO NOT use
a hose, high pressure washers or otherwise pour running water on
your Landroid
®
M, it is best to use a spray bottle filled with water.
When cleaning the machine body use a soft brush or clean cloth and
avoid using solvents or polishes (See Fig. L). Lastly, make sure that
you remove all build up of grass clippings and debris.
B. Cleaning the Underside
Again, it is important that you power the Landroid
®
M OFF using the ON/Off Button and wear protective gloves
before touching the Blade Turning Disc (13).
First, flip your Landroid
®
M upside down to expose its underside. Here you will see the Blade Disc, the chassis, and the
Front Wheel (15) and Driving Wheel(10). Clean everything thoroughly with a soft brush or moist rag. Rotate the Blade Disc
to ensure it rotates freely. Check the blades spin freely around the fixing screws. Remove any obstructions.
IMPORTANT: Remove any lodged debris so that it does not cause a crack in the Blade Disc. Even the
tiniest crack can decrease your Landroid
®
M's mowing output.
C. Clean the contact pins and the charging strips
Clean the Contact Pins (3) located on the Charging Base (4) and the Charging Strip (5) located on the Landroid
®
M using a
cloth. Remove any build up of grass clippings and debris around the contact pins and charge strips periodically to ensure
the Landroid
®
M successfully charges each time.
7.3
Battery life
The heart of the Landroid
®
M is its 28-volt lithium-ion battery. No maintenance is required. For proper storage of the battery,
make sure it is fully charged in kept in a cool dry place between (20°C-60°C).
The life-span of the Landroid
®
M’s battery depends on various factors, such as:
• The time span of the mowing season in your region.
• Amount of hours the Landroid
®
M mows per day.
• Battery maintenance during storage.
Landroid
®
M can be charged manually without the boundary wire.
To manually charge the battery without connecting the boundary wire to the charging base;
1. Connect the Charging Base to a suitable power supply.
2. Manually dock the Landroid
®
M into the Charging Base while the Landroid
®
M is powered off.(See
Fig. M1)
3. The charging base red light will turn on.
4. While “charging” is shown on the screen.(See Fig. M2) Landroid
®
M will begin to charge.
L
M1
To Next Page
Loading...
Need help?
General
