Worx Landroid Original Instructions

Lawn Mowing Robot EN
15
Plug Replacement (UK & Ireland Only)
If you need to replace the fitted plug then follow the instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
Blue – Neutral
Brown – Live
As the colors of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in
your plug, proceed as follows. The wire which is coloured blue must be connected to the terminal which is marked with N. The wire which
is coloured brown must be connected to the terminal which is marked with L.
WARNING: Never connect live or neutral wires to the earth terminal of the plug. Only fit an approved BS1363/A plug and the
correct rated fuse.
NOTE: If a moulded plug is fitted and has to be removed take great care in disposing of the plug and severed cable, it must be destroyed
to prevent engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
Cable grip
Brown L (live)
13 Amp fuse approved
to BS1362

Worx Landroid Specifications

General

Battery Voltage	20 V
Battery Type	Lithium-ion
Rain Sensor	Yes
App Control	Yes
Cutting Height Range	30-60 mm
Battery Capacity	2.0 Ah
Weight	9 kg
Maximum Incline	35%
Connectivity	Wi-Fi
Blade Type	3 floating blades
Noise Level	Approx. 60-65 dB