1. AUXILIARY HANDLE
2. LOCK OFF BUTTON
3. ON/OFF SWITCH
4. BATTERY PACK
5. SAFETY GUARD
6. FLOWER GUARD
7. LINE CUTTER
8. TRIMMER HEAD COVER (See Fig. F2)
9. CAP RELEASE LATCH (See Fig. F2)
10. SPOOL (See Fig. F2)
11. TRIMMER HEAD (See Fig. F2)
12. EYELET (See Fig. F2)
13. LINE FEED BUTTON (See Fig. F1)
Not all the accessories illustrated or described are included in standard delivery.
TECHNICAL DATA
Voltage 20V Max* Lithium
No load speed 8000/min
Cutting diameter 30cm
Line diameter 1.65mm
Charging time Approx. 3hr
Machine weight 2kg
* Voltage measured without workload. Initial battery voltage reaches Maximum of 20 volts.
Nominal voltage is 18 volts.
ACCESSORIES
Charger (WA3759) 1
Battery pack (WA3549.1) 1
Spool (WA0004) 1
Safety guard 1
We recommend that you purchase your accessories from the same store that sold you the
tool. Use good quality accessories marked with a well-known brand name. Choose the type
according to the work you intend to undertake. Refer to the accessory packaging for further
details. Store personnel can assist you and offer advice.
To Next Page
Loading...
Need help?
General
