2 in 1 Cordless Trimmer/Edger EN
6
1. LOCK OFF BUTTON
2. REAR HANDLE
3. ON/OFF SWITCH
4. BATTERY PACK *
5. HANDLE UNLOCK BUTTON
6. UPPER SHAFT
7. LOCKING COLLAR
8. LOWER SHAFT
9. SAFETY GUARD
10. FLOWER GUARD
11. AUXILIARY HANDLE
12. COMMAND FEED BUTTON
13. EDGER WHEEL
14. LINE FEED BUTTON
15. LINE CUTTER
* Not all the accessories illustrated or described are included in standard delivery.
TECHNICAL DATA
WG163 WG163.1 WG163.2
WG163.3 WG163.4
WG163.9 WG180 WG180.9
Voltage 20V
MAX.* 40V MAX.**
No load speed 7600/min
Cutting diameter
12inch (30cm)
0.065inch (1.65mm)
Line diameter
Charging time 5hrs / 8hrs /
Machine weight 5.3lbs (2.4 kg) 4.6lbs (2.1 kg) 5.9lbs (2.7kg) 4.6 lbs
*Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts. Nominal voltage is 18 volts.
**Voltage measured without workload. Initial battery voltage reaches maximum of 40 volts. Nominal voltage is 36 volts.
ACCESSORIES
WG163 WG163.1 WG163.2 WG163.3 WG163.4 WG163.9 WG180 WG180.9
Safety guard
11111111
Flower guard
11111111
Charger
1(WA3742) 1(WA3742) 1(WA3742) 1(WA3742) 1(WA3742) / 1(WA3747) /
Battery pack
2(WA3525) 2(WA3525) 1(WA3575) 2(WA3525) 3(WA3525) / 1(WA3580)
/
Edger wheel
11111111
Spool (WA0004)
16111111
wall mount (WA0138) / / / 1 1 / / /
spool holder (WA0044)
///11///
Only use the appropriate accessories intended for this tool. Accessory information can be found on the product
packaging, at a WORX dealer or on our website at www.worx.com.
WARNING: Any other accessory or attachment may increase the risk of injury.
To Next Page
Loading...
Need help?
General
