Why Worx WR206E charging time is too long?
If your Worx Lawn Mower is taking longer to charge, clean the contact pins on the charging pile and the charging strip on the mower with a cloth, as debris can cause poor connection. Also, the charging protection program might be activated due to high temperature; place the charging base in a shady area or wait until it cools down.
Why does my Worx Lawn Mower collide frequently?
Frequent collisions with your Worx Lawn Mower can happen if the grass is taller than 15 cm; trim it down. If there's grass around suspended objects like hanging fences or slides, lay magnetic strips or set up a 5 cm non-grass pathway around those areas.
How to fix the LED light on the Worx WR206E charging pile when it doesn't turn on?
If the LED light on your Worx Lawn Mower's charging pile isn't turning on, the cause may be a lack of power. Ensure the charging base is correctly connected to the charger, and that the charger is properly connected to a functioning power supply.
What to do if Worx WR206E software upgrade fails?
If the software upgrade fails on your Worx Lawn Mower, move closer to the router to strengthen the Wi-Fi signal. Also, ensure that the battery level is above 50% by placing the mower on the charging station.
Why Worx WR206E Lawn Mower cannot correctly dock with the charging pile?
If your Worx Lawn Mower isn't docking correctly, try restarting it, as environmental factors may be interfering. Also, clean the contact pins on the charging pile and the charging strip on the mower with a cloth to ensure good connection.
Why does my Worx WR206E have shorter run-times?
Shorter run times for your Worx Lawn Mower can be caused by several factors. Check the blade disc for clogs and clean it, especially if the grass is high or thick. Examine the blade disc and blades for debris and replace them if necessary, as an unbalanced disc can increase power consumption. The battery might also be old and need replacement, or the working time may need to be reset.
What to do if my Worx WR206E Lawn Mower does not charge?
If your Worx Lawn Mower isn't charging, check that the power cord is properly connected to the charger and the charger is connected to a working power supply. Also, ensure that both charging strips on the mower touch the center of the charging contacts on the charging pile.
General| Type | Robotic lawn mower |
|---|---|
| Bluetooth | Yes |
| Noise level | 59 dB |
| Display type | LCD |
| Cutting width | 180 mm |
| Product color | Black, Orange, Red, Silver |
| Cutting system | Rotary blades |
| Number of blades | 3 |
| Number of wheels | 3 wheel(s) |
| Maximum lawn area | 600 m² |
| Mulching function | - |
| Maximum cutting height | 60 mm |
| Minimum cutting height | 30 mm |
| Suitable for slope up to | 30 % |
| International Protection (IP) code | IPX5 |
| Battery type | Built-in battery |
| Power source | Battery |
| Battery capacity | 2 Ah |
Weight and Dimensions| Depth | 626 mm |
|---|---|
| Width | 460 mm |
| Height | 265 mm |
| Weight | 13500 g |
To Next Page
