Electric Circular Saw                      EN
11
ADDITIONAL SAFETY 
RULES:
1. Always wear a dust mask.
GENERAL SAFETY 
WARNINGS FOR YOUR 
LASER
WARNING: Read all safety warnings and 
all instructions. Failure to follow the 
warnings and instructions may result in 
serious injury.
Save all warnings and instructions for future 
reference.
These lasers do not normally present an 
optical hazard although staring at the beam 
may cause flash blindness.
Do not stare directly at the laser beam. A 
hazard may exist if you deliberately stare into 
the beam, please observe all safety rules as 
follows:
1) The laser shall be used and maintained 
in accordance with the manufacturer’s 
instructions.
2) Never aim the beam at any person or an 
object other than the work piece.
3)  The laser beam shall not be deliberately 
aimed at another person and shall be 
prevented from being directed towards 
the eye of a person for longer than 0.25 
seconds area.
4)  Always ensure the laser beam is aimed 
at a sturdy work piece without reflective 
surfaces, e.g. wood or rough-coated 
surfaces are acceptable. Bright shiny 
reflective sheet steel or similar is not suitable for 
laser applications as the reflective surface may 
direct the laser beam back at the operator.
5)  Do not change the laser device with 
a different type. The manufacturer or an 
authorized agent must carry out repairs.
6) CAUTION: Use of controls or adjustments 
other than those specified herein may result in 
hazardous radiation exposure.
ADDITIONAL SAFETY WARNING FOR CLASS 
2 LASER
The laser device fitted to this tool is CLASS 2 
with a maximum radiation of 1.5mW and 650nm 
wavelength.
CLASS 2 LASER RADIATION, DO NOT STARE 
INTO BEAM
SYMBOLS
To reduce the risk of injury, user must 
read instruction manual
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Do not stare into beam
Laser radiation
Waste electrical products must not be 
disposed of with household waste. 
Please recycle where facilities exist. 
Check with your local authorities or 
retailer for recycling advice
Before any work on the machine itself, 
pull the mains plug from the socket 
outlet.
Wear protective gloves