Worx WX426 Manual

Electric Circular Saw EN
12
Wood
Aluminium
Metal
Plastic
Tile
Incorrect
Correct
Lock
Unlock
Abrasive cutting disc
HSS blade
TCT blade
1.
HYPERLOCK™ ACCESSORY CLAMPING
LEVER
2. FIXED UPPER GUARD
3. VACUUM ADAPTER
4. DUST EXTRACTION OUTLET
5. PARALLEL GUIDE CLAMPING FIXTURE
6. PARALLEL GUIDE
7. LOWER BLADE GUARD
8. BASE PLATE
9. LOWER GUARD LEVER
10. DEPTH ADJUSTMENT LEVER
11. LOCK OFF BUTTON
12. ON/OFF SWITCH
13. HEX KEY
14. SPINDLE LOCK BUTTON
15. LASER
16. SAW BLADE (See Fig. A)
17. BLADE BOLT (See Fig. A)
18. OUTER FLANGE (See Fig. A)
19. LASER ON-OFF SWITCH (See Fig. E)
20. LASER BATTERIES (TWO) (See Fig. F2)
Not all the accessories illustrated or described
are included in standard delivery.
TECHNICAL DATA
Type WX426 (4 - designation of
machinery, representative of Saw)
Voltage
230-240V~50Hz
Rated power 400W
No load (rated) speed 3600/min
Blade size
TCT blade
85mmx1.2mmx15mmx24T
HSS blade
85mmx1.2mmx15mmx44T
Abrasive cutting disc
85mmx1.2mmx15mmx60G
Max cutting depth 27mm

Worx WX426 Specifications

General

Input power	400 W
Power source	AC
Dust blower	Yes
Product color	Aluminium, Black, Orange
Built-in light	-
Suitable for materials	Metal, Particle board, Plasterboard, Plastic, Tile, Wood
Blade bore	15 mm
Blade diameter	85 mm
Idle speed (max)	3000 RPM
Cutting depth (90º)	- mm

Weight and Dimensions

Depth	3200 mm
Width	90 mm
Height	180 mm
Weight	1800 g