Worx WX445 Original Instruction

Circular saw with laser EN
8
ACCESSORIES
Vacuum adaptor 1
Parallel guide 1
Hex key 1
Blade: 190mmx30mmx24T (only for WX445) 1
Blade: 185mmx16mmx24T (only for WX445.1) 2
We recommend that you purchase your accessories from the same store that sold you the tool.
Use good quality accessories marked with a well-known brand name. Choose the type according
to the work you intend to undertake. Refer to the accessory packaging for further details. Store
personnel can assist you and offer advice.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool
is switched off and when it is running idle but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
0
C or less
Plan your work schedule to spread any high vibration tool use across a number of days.

Worx WX445 Specifications

General

Blade diameter	190 mm
Number of teeth	24
Idle speed (max)	5000 RPM
Cutting depth (45º)	47 mm
Cutting depth (90º)	66 mm
Saw blade included	Yes
Quantity	1
Diamond disc	-
Product color	Multicolor
Input power	1600 W
Power source	AC

Weight and Dimensions

Depth	240 mm
Width	320 mm
Height	230 mm
Weight	4300 g