Worx WX445 Original Instruction

Circular saw with laser EN
7
TECHNICAL DATA
Type WX445 WX445.1( 4-designation of machinery, representative of saw)
WX445 WX445.1
Rated voltage 220-240V ~50/60Hz
Rated power 1600W
Rated no load speed 5000/min
Max. cutting capacity
90° 66mm 64mm
45° 47mm 45mm
Bevel capacity 0-51°
Blade size 190mm 185mm
Protection class
/II
Weight 4.3kg
NOISE AND VIBRATION DATA
A weighted sound pressure L
PA
L
pA
: 92.4dB(A)
K
PA
3dB(A)
A weighted sound power L
WA
L
wA
: 103.4dB(A)
K
WA
3dB(A)
Wear ear protection when sound pressure is over 80dB(A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745
Typical weighted vibration
Vibration emission value a
h
= 4.37m/s
2
Uncertainty K=1.5m/s
2
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed

Worx WX445 Specifications

General

Blade diameter	190 mm
Number of teeth	24
Idle speed (max)	5000 RPM
Cutting depth (45º)	47 mm
Cutting depth (90º)	66 mm
Saw blade included	Yes
Quantity	1
Diamond disc	-
Product color	Multicolor
Input power	1600 W
Power source	AC

Weight and Dimensions

Depth	240 mm
Width	320 mm
Height	230 mm
Weight	4300 g