To Next PageTo Next Page
Need help?Do you have a question about the Wouxun KG-UV920P-E and is the answer not in the manual?
Product compliance with essential requirements of Directive 1999/5/EC for EU countries.
Guidelines for optimal performance and RF energy exposure limits, including antenna installation.
Precautions for RF energy, explosive atmospheres, dynamite, children, wiring, and antenna placement.
Safety tips for mobile antenna placement, low power usage, and driving while using radio.
Information on contacting dealers and using approved components/accessories for safety.
List and images of all standard accessories included with the transceiver.
Steps for mounting the transceiver bracket and securing the unit in the vehicle.
Instructions for installing the flat switchboard panel onto the transceiver.
Connecting the cable to the transceiver and proceeding with installation as shown.
Important reminder about replacing fuses and seeking assistance if issues persist.
Steps for aligning and fastening the inclined switchboard panel to the transceiver.
Steps for aligning and fastening the flat switchboard panel to the transceiver.
Connecting the cable and completing the front panel and main station setup.
Detailed wiring diagram and connection points for transceiver station to operating front panel.
Warning about using non-approved connection wires for safety and operational effectiveness.
Steps for safely disconnecting and removing the front panel and transceiver unit.
Guidance on installing the supplied support bracket for the front panel.
Connecting external speakers to the 3.5mm outlets on the transceiver.
Connecting the hand microphone cable to the 8-point socket on the front panel.
General
