How to stop unwanted interference on my Wouxun KG-XS20G Radio?
If you are experiencing unwanted interference on your Wouxun Radio, try enabling CTCSS or DCS tone to filter out unwanted transmissions. Alternatively, try using a different channel.
Why is the receive indicator on but there is no sound on my Wouxun KG-XS20G?
If the receive indicator is active on your Wouxun Radio but you're not hearing any sound, first, verify the volume level. If the volume is adequate, ensure that CTCSS/DCS is disabled, or that its settings match the incoming transmission. Also, check your squelch settings to ensure they are properly configured.
Why does my Wouxun Radio transceiver automatically turn off?
If your Wouxun Radio transceiver automatically turns off, verify that your power source is not below 11.5 volts.
What to do if the keypad is unresponsive on my Wouxun Radio?
If the keypad on your Wouxun Radio is unresponsive, first, check if the keypad has been locked. Also, check if other keys are currently pressed.
Why my Wouxun Radio cannot power on?
If your Wouxun Radio will not power on, ensure that the radio is properly wired and grounded to the vehicle. Also, confirm that the vehicle ignition switch is turned on.
Why does voice pause every 3 seconds on my Wouxun KG-XS20G Radio?
If the voice on your Wouxun Radio pauses every 3 seconds, check if the Priority Scan function is active.
Why can't I activate Scan on my Wouxun KG-XS20G?
If you cannot activate the Scan function on your Wouxun Radio, check if the scan group channel or Scan Add function is turned on.
Provides instructions on how to safely mount the radio unit within a vehicle.
Explains how to connect the radio to a suitable DC power supply for operation.
Guides users through the process of safely replacing a blown fuse in the power circuit.
Details the procedure for connecting a compatible antenna for optimal radio performance.
Instructions on how to turn the radio unit on and off.
How to control the audio output level of the radio.
Basic steps to select a channel and make your initial transmission.
Describes how to switch between channel and frequency-based tuning modes.
Details how to find and use GMRS repeater channels for extended range.
Configures the squelch level to filter out background noise and weak signals.
Sets the transmit power level for radio transmissions.
Lists detailed technical specifications of the radio's hardware and performance.
General| Frequency Range | 400-470MHz |
|---|---|
| VOX | Yes |
| Scan | Yes |
| Display | LCD |
| Battery | Li-Ion |
| Bluetooth | No |
| GPS | No |
| Channel Capacity | 128 channels |
| Privacy Codes | CTCSS/DCS |
To Next Page
