44
Use the big hex wrench to unscrew
the screws on both sides of the
tank counterclockwise.
＊
Notice:
Please remove the printing platform first.
Remove the tank.
Tank
Tank
Big hex wrench
Big
hex wrench
＊
Notice:
❶
Please remove the printing platform first.
❷
When removing the tank
,
do not drop the resin
on the outer wall of the tank
,
the mounting screw
holes
,
the working panel
,
the outer casing and the
cover,and the installation interspace.
❸
Do not scratch the FEP film at the bottom of the
tank when removing the tank.
❹
Please place the removed tank properly on a
clean and soft surface to avoid damage.
Recycled resin and tank cleaning
Pour the remaining resin in the
tank into the prepared resin
storage container along a corner
of the tank.
＊
Notice:
❶
Please seal the poured resin in a dark
place.
❷
Please clean the resin on the outer wall of
the tank in time to avoid damage to the LCD
screen.
45
Tank
Resin
Resin bottle
Recycled resin and tank cleaning
To Next Page
Loading...
Need help?
General