78
Pan head screw
Small hex wrench
Use a small hex wrench to loosen the
6 pan head screws on both sides of
the Z-axis counterclockwise.
Apron
Remove the apron along the front
of the printer.
＊
Notice:
Please carefully remove the apron.
Adjustment of Z axis
79
Use the big hex wrench to turn
counterclockwise to unscrew
the two round head screws
that secure the copper nut.
＊
Notice:
Please take good care of the removed
parts.
Big hex wrench
Round head screw
Copper nut
Cantilever
Adjustment of Z axis
To Next Page
Loading...