Basic Operations
= STOP
To stop Robosapien™V2 from performing his current action, press
stop at any time. When held for about 2 seconds, Robosapien™V2
will perform a reset to default body positions.
LEFT STICK = WALKING
Multi directional walking is controlled by the left stick.
= WALK FORWARD
Push forward once on the left stick and Robosapien™V2 will
walk forward.
Push again while he is walking to make Robosapien™V2 walk with
shorter steps.
=GAIT CHANGE (while walking)
Robosapien™V2 has 4 different styles of walking. Each time you
press the button he will move to the next style.
+ + = BULLDOZER FORWARD
Robosapien™V2 normally avoids obstacles using his IR vision and
touch sensors, but put him in bulldozer mode and he will walk
forward several steps no matter what is in his way.
+ + = BULLDOZER BACKWARD
Make Robosapien™V2 walk backwards several steps, without
stopping for obstacles.
Note: Robosapien™V2’s walking will be affected by different
surfaces or if he is carrying something heavy. For an emergency
stop without the use of the controller, activate his flinch reflex
[See: Vision Systems (p.21-22)].
Note: Control Robosapien™V2 as if he is your reflection in a mirror.
Left shift 1 for his right side and right shift 2 for his left side.
L
To Next Page
Loading...
