+ + = GUARD MODE
Put Robosapien™V2 into Guard Mode and he will become stationary.
His infrared visions sensors or stereo sonic sensors will sound
an alarm or perform a program assigned to them when triggered by
sound or vision detection.
• If Robosapien™V2’s VISION or SOUND is turned OFF when he is
put into Guard Mode, it will automatically turn ON.
• They will automatically turn OFF again on leaving Guard Mode.
• Both the sound program and the Vision program can be used for
Guard Mode (This is their primary function).
• If he is disturbed and there is nothing in the program memory, he
will perform a default action.
• Robosapien™V2 will leave Guard Mode at the touch of ANY
button.
• If he hears ten sounds in a row with no vision disturbances in
between he will turn his sound OFF.
• If he has 3 vision disturbances in a row with no break between
them, he will turn off his vision.
• If both are turned OFF in this manner he will exit Guard Mode.
CAUTION: Due to Robosapien™V2 becoming animated during Guard
Mode, it is advisable not to leave him near the edge of a table.
note: touch sensors do not function in guard mode.
Robosapien™V2 will go to Sleep Mode after 30 minutes in Guard
Mode. Any disturbance during Guard Mode will not affect this time
out.
Guard Mode
35
To Next Page
Loading...
