Wren V5AP User Manual
16
Volume indicator is lit when the product is ON.
• Press the Volume + or Volume – on the speaker or remote control to increase or decrease
volume.
• During any volume adjustment, the volume indicator will blink.
• If the Volume + or Volume – button is pressed and held for more than one second, the
volume level will increase or decrease at an accelerated rate.
• If volume is decreased until the system has no output, the system will enter Mute mode. The
Power LED will change to amber.
• Press the Power button on the speaker or the Mute button on the remote control to mute.
Press the Power button or the Mute button again to unmute.
• Any volume adjustment will unmute the system.
Please Note: When in AirPlay mode, the volume control on the AirPlay source device (iPhone,
iPad, iPod Touch, or iTunes running on a PC or MAC) will override the volume control on the
Wren V5AP and the remote control.
Using Your Wren V5AP: Volume
To Next Page
Loading...
