4-5
hands away from pin holes or ttings that eject
hydraulic uid under high pressure.
• Disconnect spark plug wire(s) and the negative
battery cable before making any repairs.
• The machine should not be used after the
blades or other part of the machine strikes
a foreign object, until conducting a thorough
inspection and any damage is repaired.
• Do not climb underneath
• Do not service the machine while suspended
by an unapproved lift, such as a forklift, or hoist/
structure not approved for overhead lifting.
Use proper lifts, or jack stands to support the
machine.
• Don’t change RPM’s outside of operating limits
or alter the governor operation
• Do not tow or push with force or over long
distances. When moving stuck or disabled
equipment, place transmission(s) in neutral or
hydro bypass.
• Use tires with the original tread pattern. Use
of alternate tires and treads may cause loss of
control.
• Use of parts other than specied parts
supplied by Wright Manufacturing, Inc. may
compromise the safe use of the machine and
not recommended. Their use could void the
warranty. Always check with your Dealer or the
Wright website, www.wrightmfg.com for the Part
Lists and diagrams for your machine.
• Waste products, such as used oil, fuel,
coolant, brake uid and batteries, can harm the
environment and people. Do not use beverage
or unlabeled containers for waste uids –
someone may drink from them. Do not leave
open containers where they can be accessed
by children or animals.
To Next Page
Loading...
