Support RS232/RS485 control, Baud 600-115200bps, Compatible with
more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin,
Yaan, etc
Output one channel PAL/NTSC color bar video signal for testing monitor or
video cable.(red, green ,blue, white and black color )
Test UTP cable connection status and display on the screen. Read the
number on the screen
Captures and analyzes the command data from controlling device, also can
send hexadecimal
IP address scan, link scan, and Ping test. Quickly search the for IP camera’s
IP address on your network
Find a connected cable from a bundle of cables using audio tones
Measures PoE switch voltage and displays pin configuration
Digital Multi-meter
*(Optional)
AC/DC Voltage, AC/DC current, Resistance, Capacitance, Data hold,
Relative measurement, Continuity testing . Testing speed: 3 times/ seconds,
Data range -6600～+6600.
Optical power meter
*(Optional)
Calibrated Wavelength(nm) :850/1300/1310/1490/1550/1625nm
Power range(dBm) :-70～+10dBm
Visual fault locator
*(Optional)
Test fiber’s bending and breakage ( SM and MM fiber)
TDR cable test
*(Optional)
Cable’s open circuit (Breakpoint) and short circuit measurement(BNC
cable, telephone cable)
Built-in 7.4V Lithium polymer battery ,5000mAh
To Next Page
Loading...