Wsdcam IPC-4300 Plus - HDMI in ( *Optional ); Input Image; OSD Menu; Lite Mode & Normal Mode

Page.15.
3.2.4 HDMI IN ( *Optional )
DVR or other device’s HDMI in port connect to tester’s HDMI in port, the meter will display input
image
3.3 OSD menu
 Press the key 2 seconds to turn on
 Press the key 2 seconds to turn off
 short press the key to enter sleep mode,press it again to test if tester work abnormally
and cannot be turned off , Press the key several seconds to turn off, the tester reset
3.3.1
Lite mode & Normal mode
 Lite mode: You can easy find corresponding apps