www.wto-tools.com 21
5.2 Shipment
NOTICE
Store DTH and accessories in clean and dry environment.
Surfaces of DTH must be lightly lubricated and covered with corrosion protection paper to
protect the unit from dirt and rust.
Tool interface needs to be protected with a proper cover.
NOTICE
Rotate DTH spindle by hand before storage and once per month when being in storage to
avoid contact corrosion in the bearings.
5 Storage and transport
5.1 Storage
When transporting the product by rail, air or sea, always use the complete original WTO DTH
packaging, transport container and cardboard box, or equivalent, to protect against shock
and vibration.
5.3 Shipping claims
Damage caused during shipment must be reported to WTO in writing immediately upon
receipt of product. Claim for damage must include pictures of damage to packaging and
product.
To Next Page
Loading...
