Need help?Do you have a question about the wtw OxiTop Control OC 110 and is the answer not in the manual?
General| Brand | wtw |
|---|---|
| Model | OxiTop Control OC 110 |
| Category | Measuring Instruments |
| Language | English |
Introduction to the OxiTop ® system and its applications.
Explanation of the respirometric pressure measurement method.
How measured values are recorded, stored, and transferred.
Information sources for further details and application reports.
Guidelines for safe operation and understanding warning symbols.
Rules for authorized use, proper operation, and preventing hazards.
List of components included with the OxiTop ® OC 110.
Information on battery power for the controller and measuring heads.
Step-by-step guide for setting up the instrument for the first time.
Overview of controller keys, socket fields, and basic interaction.
Procedures for powering on the controller and measuring heads.
How to navigate menus, functions, and understand measurement flow.
Instructions for preparing samples and attaching measuring heads.
Steps to initiate a measurement in BOD modes.
Procedure to retrieve data from all measuring heads.
Overview of the sample list, status, and types.
How to analyze measurement results and curves.
Preparing samples for the BOD Special mode.
Initiating measurements with variable parameters in BOD Special.
Safety precautions and potential risks when measuring biogas.
Preparing samples for pressure measurement.
Steps to start a pressure measurement.
Retrieving data for all samples in Pressure p mode.
Overview of sample status and types in Pressure p mode.
Recording and retrieving individual pressure readings.
Analyzing pressure measurement data and curves.
Accessing functions for settings, checks, and maintenance.
Identifying available measuring heads for new samples.
Displaying current instrument configuration.
Configuring operating mode, time, GLP, and other parameters.
Performing system checks like head status and calibration tests.
Procedures for erasing data, resetting, and reading out data.
Using software for data transfer, management, and export.
Replacing controller and measuring head batteries.
Guidelines for cleaning the instrument and sample bottles.
Proper disposal procedures for the instrument.
Explanations and remedies for common error messages.
Specifications for the controller unit.
Specifications for the measuring head unit.
To Next Page
