Need help?Do you have a question about the wtw 330i and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Temperature Resolution | 0.1 °C |
| Protection Class | IP 54 |
| pH Resolution | 0.01 pH |
| mV Resolution | 0.1 |
| Temperature Measurement Range | -5 to 105 °C |
| Measurement Parameters | pH / mV / °C |
| Conductivity Measurement Range | No |
| Dissolved Oxygen Measurement Range | No |
| Display | LCD |
Defines the intended and permitted uses of the measuring instrument.
Provides essential safety guidelines for instrument operation.
Details the steps for setting up the instrument for the first time.
Explains how to power the instrument on and initial startup display.
Step-by-step guide on how to measure the pH of a sample.
Instructions on how to measure the ORP voltage of a solution.
Covers the importance, timing, and methods for calibrating the instrument.
Details the AutoCal TEC calibration procedure using WTW buffer solutions.
Explains the AutoCal DIN calibration using standard buffer solutions per DIN 19266.
How to adapt instrument settings to user requirements.
To Next Page
