wtw 330i - Measuring ORP Voltage

pH 330i/340i Operation
17
4.2.3 Measuring the ORP voltage
In conjunction with an ORP electrode, e.g. SenTix ORP, the measuring
instrument can measure the ORP voltage (U) of a solution.
Note
ORP electrodes are not calibrated. However, you can check ORP elec-
trodes using a test solution.
1 Perform the preparatory activities according to section 4.2.1.
2 Immerse the ORP electrode in the test sample.
3 Press the <M> key until U appears on the status display.
The ORP voltage (mV) of the test sample appears on the dis-
play.
4 Wait for a stable measured value.
/pH
ConCal
Auto
Store
LoBat
AutoCal DIN
CalError
ARng
AR
AutoCal TEC
8
pH
1
%
°F
S
Time
Baud
Day.Month No.
Ident
Year
RCL
TempError
mg/L
% ppm
mol/L
ISE
3
1
2
2
0
mV
°C
U
TP
1
7