03
04
The device has a lithium-ion rechargeable battery, and you need to charge the batte-
ry before first use and when the battery is low.
Connect your device to a power outlet using the included cable and adaptor.
GET STARTED
Charge your new WYBOT C1 Pro/Max(OS7010/OS7010 Max)
You can download the WYBOT App to your smart mobile device by scanning QR code
below, or from Google Play or App Store.
Connect to your App
Setup your new WYBOT C1 Pro/Max(OS7010/OS7010 Max)
Note:
1. When yellow light flashing, you should remove your device out of water and
charge it.
2. If red LED light is on, you can find solution from trouble shooting in this manual
or call for service.
You can turn on the device by pressing the on/off button. The LED indicator on the
front will display a solid blue when the device is on.
The adaptor has an indicator, Which will display blue light indicating the power
supply status.
Below is the indication of the LED lights when running, you may refer it to know
different device status.
LED Color Indication
Solid
Flashing
Solid
Flashing
Solid or flashing
Status
Power On
Under working
Connecting to App
Charging in progess, low battery
or under self-parking in the pool
Fault
Flashing
Solid
Charging in progress
Fully charged/ battery level
Note:
1. When charging ,you should ensure your device at least 3m (appr. 10ft) away from
the edge of the pool.
2. For reducing fire risk, keep your device and adaptor away from direct
sunshine or water when charging.
3. For your important safety, you need to double check the device is powered off
and the charging port is dry before charging.
4. The best charging environment is temperature at 32℉ -95℉ (0℃ -35℃ ), RH at
5%-95%.
The LED indicator in the front of the device will turn starting from a flashing light
to a flashing light during charging, and turn a solid light when fully charged.
Solid : fully charged!
The LED will continue a flashing indicating low battery when powering on the
device, and you should charge it immediately.
Note:
To Next Page
Loading...
