03
04
The device has a lithium-ion rechargeable battery, and you need to charge the batte-
ry before first use and when the battery is low.
Connect your device to a power outlet using the included cable and adaptor.
GET STARTED
Charge your new WYBOT S2(WY210C)
Setup your new WYBOT S2(WY210C)
Below is the indication of the LED lights, you may refer to it to know different device
status.
Turn on the device by pressing the on/off button. The LED indicator on the front will
display a solid green to display current battery level and then a solid blue when
the device is on. If the battery level is too low to start cleaning, the LED lights will
show a flashing
Fully Charged！
The adaptor has an indicator, Which will display blue light indicating the power
supply status.
The LED indicators in the front of the cleaner turn solid green light one by one when
charging, and all LED lights turn when fully charged.
Below is the indication of the LED lights, you may refer it to know different device
status.
LED Light Indication
Solid
Flashing
Solid
Flashing
Solid or flashing
Status
Power On
Under working
Connecting to App
Low battery or under
self-parking in the pool
Fault
Flashing
Solid
Charging in progress
Fully charged
Battery Level (%)
0~20
20-40
Quantity
40-60
60-80
80-100
Note:
1. When charging ,you should ensure your device at least 3m (appr. 10ft) away from
the edge of the pool.
2. For reducing fire risk, keep your device and adaptor away from direct
sunshine or water when charging.
3. For your important safety, you need to double check the device is powered off
and the charging port is dry before charging.
4. The best charging environment is temperature at 32℉ -95℉ (0℃ -35℃), RH at
5%-95%.
Low battery！
MODE
MODE
To Next Page
Loading...
