Wyrestorm MX-0404-PP - 2. Features; Input;Output and Connectivity

2
Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343
Contents 1. Introduction
CONTENTS AND INTRODUCTION
The WyreStorm Pro-Plus range builds upon the popularity
of our Pro range of dual Cat5e HD Matrix Products and
our full HDBaseT™ matrix range to oer the very best in
aordable single cable AV distribution and control.
Using the latest Class B HDBaseT platform for signal stability and
resistance to interference, products in the Pro Plus range provide
single cable transmission of full 1080p HD Video, HD Audio and
bidirectional control via discrete IR from a centralised AV location
to displays located up to 70m/230ft away using unshielded or
shielded Cat5e/6 cable*
This MX-0404-PP HDBaseT Matrix allows any connected HDMI
inputs to be distributed independently and simultaneously over
distance to any of the 4 HD output displays connected to the
matrix, regardless of HDCP encryption.
Further control is achievable via RS232 including full compatibility
and integration with leading control systems.
In addition to HDBaseT outputs, Pro Plus matrices feature
duplicate HDMI outputs, mirrored to the HDBaseT, to allow
simple and hassle-free connection of local devices such as
AV receivers. Duplicate HDMI outputs also enable connection
of additional displays to essentially double the number of
connectable outputs, as well as oering opportunities to use
dierent cabling alternatives such as Fibre, Coax or Class A
HDBaseT and dierent distribution distances by using various
WyreStorm extender products.
Multiple extender sets can also be used to cascade each matrix
output up to 7 times to further lengthen or extend transmission if
required.
The system oers exibility and reliability of signal distribution,
combined with innovative features and an ease of use to deliver
HD audio and video, controlled via IR, RS232 or LAN, all on a
single Cat5e/6 cable that removes the need for additional control
and video cables on installations, whether in a residential or
commercial setting.
* When using shielded cable, please ensure you use
shielded RJ45 connectors and terminate the grounding
wire at both ends of the cable. This is standard practice
when using FTP shielded cable.
For further information on this product and other WyreStorm
ranges, visit our website or download our latest product guide.
www.wyrestorm.com
• Input: 4x HDMI / Output: 4x HDBaseT with integrated
RJ45 connectors for a single Cat5e/6 UTP cable to each
display point for ease of installation*
• Additional Output: Duplicate HDMI to the HDBaseT
Output
• Each HDMI port also supports DVI signals
2. Features
Introduction
Features
Safety Precautions
Package Contents
Panel Display:
i. Front Panel Description
ii. Rear Panel Description
Typical Application
Connection
Basic Operation
i. Front Panel Control
ii. Remote Control Operation and Battery Replacement
iii. IR Extender Control
iv. IR call-back of Matrix and Source Devices
v. Two-way IR call-back between Matrix, Sources and
Displays from multiple locations
Advanced Operation
i. RS232 Control
ii. COM CTL Control
iii. LAN Control
a. NET CTL (Matrix model ver. 1.0 only)
b. WyreStorm SmartSet (matrix model ver. 2.0,
3.0, 3.0L)
iv. EDID DIP Switch settings
Specications
1
2
3
4
5
6
7
8
9
10
11
13
14
15
16
17
12
Troubleshooting
FAQ
Maintenance
Provided Service
Mail In Service
Installation Notes
Warranty
Warranty Limits and Exclusions