Why does my x-sense XP04 keep going off for no reason?
Your x-sense Smoke Alarm may be experiencing false alarms due to improper installation. Avoid installing the alarm near cooking appliances, dusty areas, showers, or any area where the temperature drops below 40°F (4.4°C) or rises above 100°F (37.8°C).
What to do if my x-sense XP04 Smoke Alarm flashes yellow and beeps once?
If your x-sense Smoke Alarm's LED indicator flashes yellow once every 60 seconds with a single beep, it indicates a low battery. Replace the battery immediately. If you cannot replace it right away, you can press the Test/Silence button to silence the alarm for 10 hours.
Why is my x-sense Smoke Alarm flashing yellow twice?
When the LED indicator on your x-sense Smoke Alarm flashes yellow twice every 60 seconds with two beeps, it signals a malfunction. Try cleaning your alarm. If the issue continues, replace the device.
What does it mean when x-sense Smoke Alarm flashes yellow three times?
If the LED indicator on your x-sense Smoke Alarm flashes yellow three times every 60 seconds accompanied by three beeps, this indicates an end-of-life signal. Replace the battery immediately. If an immediate replacement isn't possible, you may press the Test/Silence button to silence the alarm for 22 hours.
General| Brand | x-sense |
|---|---|
| Model | XP04 |
| Category | Smoke Alarm |
| Language | English |
Details the components and features of the X-Sense hardwired alarm.
Guidance on optimal placement within a residence based on NFPA recommendations.
Specific instructions for mounting the alarm on walls or ceilings.
Special considerations for installing alarms in mobile homes or poorly insulated structures.
Pre-installation requirements and considerations for wiring and power.
Detailed instructions for wiring, mounting, and testing the alarm.
Guidance on how to react to smoke and CO alarms.
How to temporarily silence alarms and low-battery warnings.
Table explaining LED indicators, buzzers, and response for different device statuses.
Instructions for cleaning, weekly testing, and battery replacement.
Important warnings and guidelines for safe use and operation.
Understanding the limitations and performance of smoke detection.
CO alarm levels, symptoms, and specific limitations for carbon monoxide detection.
Critical safety warnings regarding electrical shock during installation and maintenance.
FCC compliance and environmental protection guidelines.
Contact details and address for the manufacturer.
To Next Page
