Why is my X-Tronic Soldering Gun tip not heating up?
If the X-Tronic Soldering Gun tip isn't heating as expected, first ensure the soldering iron is in good working order. The soldering tip might also be oxidized, so it's important to always tin the tip and keep it clean. If the issue persists, the heating element may need to be replaced.
What to do if X-Tronic Soldering Gun does not have power?
If your X-Tronic Soldering Gun unit does not have power, ensure the power cord is not damaged and is in good working condition. Also, make sure that the outlet you are using is functional.
Why does my X-Tronic 3060-PRO rattle?
The rattling sound in your X-Tronic Soldering Gun is expected. This rattle is caused by a small ball inside the unit which allows the unit to determine when the soldering iron is not in use, which then allows it to go into Sleep Mode.
Instructions to switch between Fahrenheit and Celsius display modes for temperature.
Details how the unit enters and exits sleep mode automatically based on inactivity.
Configures the sleep timer intervals for the soldering iron unit.
Guidance on tinning, cleaning, and proper care for soldering tips.
General advice for keeping the soldering station unit clean and operational.
Specifies the eligibility criteria for using the product's limited warranty.
Details the scope of coverage for defects in materials and workmanship.
Lists exclusions and limitations of the warranty coverage.
Defines the duration and breakdown of the limited warranty period.
Explains the customer's recourse for defective products during the warranty period.
Provides instructions and contact information for warranty service requests.
States the manufacturer's limitations on liability for product defects.
General| Brand | X-Tronic |
|---|---|
| Model | 3060-PRO |
| Category | Soldering Gun |
| Language | English |
To Next Page
