What to do if my X-Tronic Soldering Gun shows an S-E Error?
If your X-Tronic Soldering Gun displays an S-E error, it means the unit isn't sensing the heating element, possibly because it's cracked or worn out. You should replace the heating element. Replacement parts are available on our website: www.XTronicUSA.com.
Why is the tip of my X-Tronic Soldering Gun not heating up properly?
If your X-Tronic Soldering Gun tip isn't heating up as expected, first, make sure the soldering iron is in good working condition and isn't damaged. Also, the soldering tip might be oxidized, so it's important to regularly tin the tip and keep it clean. The heating element may also need to be replaced; replacements are available for purchase on our website: www.XTronicUSA.com.
How to troubleshoot a X-Tronic Soldering Gun that does not have power?
If your X-Tronic Soldering Gun isn't getting power, make sure the power cord isn't damaged and is in good working order. Also, check to be sure the outlet you're using is working correctly.
Why does my X-Tronic Soldering Gun rattle?
The rattling sound in your X-Tronic Soldering Gun is normal. It's caused by a small ball inside the unit that helps the soldering iron determine when it's not in use, which then activates the Sleep Mode.
Allows switching between Fahrenheit and Celsius temperature display modes.
Enables the unit to automatically cool down after inactivity to save power and extend tip life.
Controls audible feedback for button presses and mode changes, allowing mute or unmute.
Allows users to save and recall specific temperature settings for quick access.
Instructions on how to properly tin and care for the soldering tip to ensure longevity and performance.
Guidelines for keeping the main unit clean, powered correctly, and cords managed safely.
Step-by-step guide on how to safely remove and install a new soldering tip.
Information about the Bakelite screw cap, its material properties, and proper handling during tip replacement.
Defines the eligibility criteria for using the product warranty.
Outlines what defects in materials and workmanship are covered by the warranty.
Specifies exclusions from the limited warranty coverage, such as damage from misuse.
Details the duration and breakdown of the warranty period.
Explains the customer's options for resolution if a defect occurs.
Provides instructions on how to contact support and initiate a warranty claim.
General| Temperature Range | 200°C - 480°C (392°F - 896°F) |
|---|---|
| Heating Element | Ceramic |
| Standby Mode | Yes |
| Auto Shut-off | Yes |
| Voltage | 110V |
| Temperature Stability | ±1°C |
| Tip Compatibility | 900M Series |
| Display | Digital |
| Features | Digital Calibration, Sleep Mode |
To Next Page
