EasyManuals Logo

Xantrex 817-1000 User Manual

Xantrex 817-1000
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
viii Freedom X Owner’s Guide
Precautions When Placing the Inverter
Never allow battery acid to drip on the inverter when reading gravity,
or filling battery.
Never place the Freedom X Series In
verter unit directly above
batteries; gases from a battery will corrode and damage the inverter.
Do not place a battery on top of the inverter.
Regulatory
The Freedom X Series Inverter is certified to appropriate US and Canadian
standards. For more information see “Regulatory Approvals” on page 66.
The Freedom X Series Inverter is intended to be u
sed for mobile or
commercial applications. This Inverter is designed for marine applications
only when additional drip protection is installed in certain orientations. See
the section on Specifications for information.
WARNING
FIRE HAZARD
Do not install the inverter or any part of its supplied wiring in engine
compartments.
Failure to follow these instructions can result in death or serious injury.
CAUTION
BURN HAZARD
Avoid touching the external surfaces - heatsink may be hot.
Failure to follow these instructions can result in minor or moderate injury.
NOTICE
RISK OF DAMAGE TO THE INVERTER
Failure to follow these instructions can damage the unit and/or equipment.
Freedom X Series INV Owners Guide.book Page viii Tuesday, June 27, 2017 4:10 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xantrex 817-1000 and is the answer not in the manual?

Xantrex 817-1000 Specifications

General IconGeneral
BrandXantrex
Model817-1000
CategoryInverter
LanguageEnglish

Related product manuals