EasyManuals Logo

Xantrex Freedom Xi 1000 User Manual

Xantrex Freedom Xi 1000
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
viii Freedom Xi Owners Guide
Precautions When Placing the Inverter
Never allow battery acid to drip on the inverter when reading gravity,
or filling battery.
Never place the Freedom Xi Sine W
ave Inverter unit directly above
batteries; gases from a battery will corrode and damage the inverter.
Do not place a battery on top of the inverter.
Regulatory
The Freedom Xi Sine Wave Inverter is certified to appropriate US and
Canadian standards. For more information see “Regulatory Approvals” on
page 32.
The Freedom Xi Sine Wave Inverter is intended to be used for mobile or
com
mercial applications. This Inverter is designed for marine applications
only when additional drip protection is installed in certain orientations. See
the section on Specifications for information.
WARNING
FIRE HAZARD
Do not install the inverter or any part of its supplied wiring in engine
compartments.
Failure to follow these instructions can result in death or serious injury.
CAUTION
BURN HAZARD
Avoid touching the external surfaces - heatsink may be hot.
Failure to follow these instructions can result in minor or moderate injury.
NOTICE
RISK OF DAMAGE TO THE INVERTER
Failure to follow these instructions can damage the unit and/or equipment.
Freedom XI Owners Guide.book Page viii Friday, September 18, 2015 2:57 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xantrex Freedom Xi 1000 and is the answer not in the manual?

Xantrex Freedom Xi 1000 Specifications

General IconGeneral
BrandXantrex
ModelFreedom Xi 1000
CategoryInverter
LanguageEnglish

Related product manuals