975-0754-01-01 13
Operating in Shore Power Mode
The Freedom Xi operates in shore power mode when an AC source
(a generator or utility power) is present at the AC input terminals.
When the AC source is within operating range, the Freedom Xi unit
bypasses inverter mode and powers the appliances connected to the
unit. See
“Transitioning from Inverter Mode to Shore Power” on
page 17.
The Green status LED lights up to indicate that the Freedom Xi is
using utility (or generator) power and the battery is full.
When shore power is present, AC power automatically passes
through the Freedom Xi. Pressing the Inverter Power button on the
display panel does not interrupt the supply of shore power. Shore
Power mode supersedes Inverter operation.
When the Freedom Xi’s Inverter Power button is turned ON and the
AC source is outside the operating range or is disconnected, the
transfer switch automatically switches to inverter operation. See
“Transitioning from Shore Power to Inverter Mode” on page 17.
Freedom XI Owners Guide.book Page 13 Friday, September 18, 2015 2:57 PM
To Next Page
Loading...
Need help?
General